Products

EasyFit

impey-easyfit

Say goodbye to time consuming over complicated installations and hello EasyFit.

With over 250,000 successfully installations in the UK alone, EasyFit comes with a unique patent protected drainage feature, which solves the potential installation problem of the drainage point being obstructed by joists within timber floors. Simply rotate the centre drain aperture to any position that will avoid the joist or any other under floor obstruction and fit the waste outlet.

Level-Dec EasyFit wetroom floor formers are the easiest way to create the gradient for efficient drainage in a wetroom floor. They are ideal for wooden or concrete floors and are quick and easy to install, with the strength and rigidity to support up to 300kg.

  • The UK’s leading wetroom specialist
  • Over 250,000 installations in the UK
  • Lifetime Guarantee

EasyFit – the strongest wetroom floor former we have ever created.

EasyFit wetroom tray from Impey. KBB Innovation finalist 2013 Innovation is our lifeblood, we pioneered wet room floor formers with a built in gradient in 1999 and have now revolutionised the wet room industry. Say goodbye to time consuming over complicated installations and hello EasyFit. EasyFit has been engineered and manufactured to deliver a product that makes installation of wet room floors faster and easier.

Under boarding is no longer necessary with the EasyFit Dec

Before EasyFit, a typical installation of a wetroom floor former initially required the wetroom area to be under boarded with a ply-wood board. Eliminating this process with EasyFit, has significantly reduced installation time.

How to avoid under-floor joists and obstructions

EasyFit solves the potential installation problem of the drainage point being obstructed by joists within timber floors. A unique, patent protected drainage feature allows the installer to rotate the drain aperture to any position that will avoid the joist or any other under floor obstruction. Simply place EasyFit where it will be installed and if the drain aperture interferes with a joist, just rotate the centre section until it is clear and fit the trap.

Related Products

Revolver Easyclean Waste
The perfect weapon for Vinyl & Tile showers.
Revolver Waste

Register your interest

How to install a wetroom with the Impey EasyFit Dec.

EasyFit installation video

This video guide takes you through all the key aspects of installing the new EasyFit wetroom floor former.

  • Preparing the space for your wetroom floor
  • How to trim the Dec with a handsaw
  • Installing the Dec and spinning the drain to avoid joists
  • Drainage options explained
  • Securing the Dec in place
  • Waterproofing the shower area
  • Installing under-floor heating
  • Tiling your wetroom

The main benefits of Impey EasyFit

EasyFit has revolutionised wetroom installation. Manufactured using high glass content SMC, Impey EasyFit is very strong and is able to withstand up to 300kg (47 stone) without the need for under boarding, reducing both installation time and cost. Impey EasyFit is up to 21.5% lighter than the original Aqua-Dec.

Rotating drain
The EasyFit drain plate can rotate 360 degrees and avoid all underfloor wet room obstructions. The eccentric drain also features three locating rings, to provide superior hold between the Dec and the rotating drain plate.Unbeatable strength
The new EasyFit wet room Dec is stronger than the original Aqua-Dec and requires NO UNDER BOARDING

Portable
The EasyFit Dec is over 20% lighter than the original Aqua-Dec. The unique EasyFit material is also stronger but lighter.

Customisable
The EasyFit wet room Dec can be cut anywhere up to the solid surround with a standard handsaw.

EasyFit is 22mm thick
The new EasyFit is consistently 22m thick around the perimeter.

Underside cellular structure
The underside spoke pattern provides increased rigidity to the structure of the Dec.Wooden or concrete floor installation
EasyFit can be fitted on wood and concrete floors as the spoke structure bonds well with wet concrete.

Complete range of sizes
The new EasyFit Dec is available in eleven sizes from a compact 800mm square to the most spacious 1500 x 1200mm option.

Straight edge
The corners of the EasyFit have a straight edge to ensure it can be fitted flush against floorboards.

EasyFits revolutionary design makes wet room installations an easier and less time consuming process, with a range of unique features that installers have already found to be important during the installation process.‘Wetroom Solutions’ EasyFit Installation video

Installer testimonials

The light weight of the dec was a massive bonus. When installing any dec, it gets put down (dry) and maybe lifted up 2 to 3 times before it actually gets fitted into place. Being so light and easy to handle for one person it certainly makes installation much easier and less back breaking. I installed the 1750 x 750 if that was a LD dec it would have taken 2 people to install, I fitted the easyfit on my own with ease.
Stuart Gold

Eliminating under boarding is a huge bonus. You could be looking at at least two hours to under board a wet room and I have had to do one in a loft conversion where I had to go up and down two flights of stairs to cut every piece of wood.
Paul Davis, wetroom installer

Previously, double joists would have made the installation of a wetroom impossible! Instead, we just rotated the drain cover away from the joist and fitted the wetroom. It couldn’t have been easier!
Len Keep, The Bran Partnership

Myself and my plumber were really impressed with how light and easy the former is to manoeuvre and the easy location of the waste site to suit the area in which the former sits. This is a great innovation and makes the fitter’s life at lot easier.
Trevor Walker, installer

The EasyFit base is really strong and saves me time during installation as it requires no under boarding, the rotatable waste position is probably the best idea in years as it makes it easy to avoid any joists that could be in the way also the falls to the gully position are really good leaving no ponding to worry about, you have taken the level dec and improved on it with the easyfit.
Allan Morton, A&M Mobility Ltd

#Easyfit Friday winner! The dec is in and tested and I have just one word to say “awesome” it couldn’t have been easier to work with. Very impressed. The rotating waste certainly makes things a lot easier to fit as well.
Paul Dawson

Does EasyFit need under boarding?
No, the high concentration of glass within the Dec and the rib structure on the underside of the Dec provides unbeatable strength. EasyFit has been tested to 300kg / 47 stone!
Why is EasyFit stronger yet lighter?
The unique SMC mix used on EasyFit is stronger but lighter, giving maximum strength yet 21% lighter than the equivalent Level/Aqua-Dec’s.

What if there is a joist in the way of the trap?
EasyFit solves the potential installation problem of the drainage point being obstructed by joists within timber floors. A unique, patent protected drainage feature allows the installer to rotate the drain aperture to any position that will avoid the joist, or any other under floor obstruction.

Simply place EasyFit where it ml`will be installed and if the drain aperture interferes with a joist, just rotate the centre section until it is clear and fit the trap.

Can vinyl be used on EasyFit?
Yes, EasyFit has all the advantages of the previous Impey Dec’s and more! Also it’s compatible with Impey Tilesafe and Aqua-Mat.
Is EasyFit still 22mm in depth?
Yes, every EasyFit Dec is consistently 22mm around the perimeter.
What is the gradient?
EasyFit has a gradient of 15mm.
Is the EasyFit fully recyclable?
Yes, the material used on EasyFit is fully recyclable.
Can the EasyFit be trimmed?
Yes, EasyFit can be cut anywhere up to the solid surround with a handsaw.
What about waterproofing?
Impey Tilesafe waterproofing can be used with EasyFit. The benefit of the EasyFit Dec is that the Dec surface does not need to be primed with Impey Tilesafe primer, saving the installer up to 2 hours in drying time. The Impey Tilesafe membrane can be applied directly to the Dec after the surface has been cleaned and cleared of dust.
Is it available in different sizes?
Yes, EasyFit is available in 5 different sizes.
900 x 900, 1000 x 1000, 1200 x 900, 1200 x 1200, 1500 x 1200
What type of flooring can the EasyFit be used on?
Any type of flooring (wood, concrete or floating floors). The rib structure on the underside allows it to be set easily into concrete, creating a stronger key to hold the Dec in place.
Is the installation time for EasyFit the same as the previous Dec?
EasyFit provides all the extras which make a big difference to installation time, such as a rotating drain, no need for underboarding, a pre-keyed surface, screwlines and pre-drilled holes. Whilst being lighter and easier for installers to carry up the stairs!
Can you use pumped waste?
Yes pumped waste is an option; we have designed a very shallow pumped waste floor gully to compliment the EasyFit. However, only self priming pumps that are capable of sucking water can be used. This rules out the macerator style that require a gravity waste from the trap to the pump.

Important note;

It’s well worth investigating the maximum flow rate of the waste pump, if this is lower than the delivery flow rate of the shower you will experience flooding.

Is the floor drain cleanable from the top?
All of the floors drains we sell are top accessible, this means they can be cleaned from the top without removing the entire drain.This is achieved by the removal of the grating or cover, followed by the dip tube, allowing easy access to the sump of the trap for cleaning.